CG Products Price List
Version 1.3 07-18-2008
Prices for reference purposes only, subject to change without
notice.
| Chpt | Pg | Fig | Part Number | Description | Oz Ea | Price Ea | Req'd | Total | |
| 8 | == | ============= | ==== | Headrest, Seat Belts | |||||
| 8 | 3 | 12 | STEP | 1045 | step | 4.10 | $36.67 | 1 | $36.67 |
| 9 | == | ============= | ==== | Main Landing Gear and Landing Brake | |||||
| 9 | 5 | 25 | MG-1 | 1041 | plate, main gear mtg | 1.00 | $6.97 | 4 | $27.88 |
| 9 | 5 | 26 | MG-2 | 1042 | plate, main gear mtg | 2.00 | $8.74 | 4 | $34.96 |
| 9 | 5 | 28 | MKMG-4 | 1021 | bushing, main gear mtg | 0.35 | $16.25 | 4 | $65.00 |
| 9 | 6 | 30 | MKMGA | 1137 | spacer/sleeve assy, main gear mtg | 5.50 | $51.45 | 2 | $102.90 |
| 9 | 10 | 62 | CZLB-18 | 1043 | LB bellhorns | 0.30 | $8.14 | 2 | $16.28 |
| 10 | == | ============= | ==== | Canard Assembly | |||||
| 10 | 2 | 14 | NC-CLT | 1003 | lift tabs | 1.20 | $8.25 | 2 | $16.50 |
| 10 | 2 | 14 | CG-NC-CLT | 1053 | lift tabs, HD .250 | 2.40 | $12.50 | 2 | $25.00 |
| 10 | 2 | 15 | CG-LTNP | 1092 | lift tab nut plate assy with anchor nuts | 0.90 | $7.91 | 2 | $15.82 |
| 11 | == | ============= | ==== | Elevator Assembly | |||||
| 11 | 1,3 | NC2 | 1001 | hinge insert | 0.60 | $20.10 | 4 | $80.40 | |
| 11 | 1,3 | NC3 | 1002 | hinge plate assy | 0.50 | $7.36 | 6 | $44.16 | |
| 11 | 1,3 | NC5A | 1100 | pitch trim bellcrank | 3.30 | $49.45 | 1 | $49.45 | |
| 11 | 1,3 | NC6 | 1012 | torque tube end plug | 0.40 | $15.95 | 2 | $31.90 | |
| 11 | 1,3 | NC7 | 1013 | hinge jig | 0.40 | $4.18 | 2 | $8.36 | |
| 11 | 1,4 | NC-8L | 1016 | hinge pin | 7.70 | $15.30 | 2 | $30.60 | |
| 11 | 1,8 | CS10 | 1018 | lead weight, outboard | 10.05 | $9.75 | 2 | $19.50 | |
| 11 | 1,8 | CS11 | 1017 | lead weight, inboard | 6.20 | $7.05 | 2 | $14.10 | |
| 11 | 1,3 | MKNC-12A | 1010 | torque tube offset, left | 8.60 | $160.00 | 1 | $160.00 | |
| 11 | 1,3 | MKNC-12A | 1011 | torque tube offset, right | 8.60 | $160.00 | 1 | $160.00 | |
| 11 | 1,3 | NCTT-CZ | 1014 | torque tube , elevator, 52.1" per plans | 9.60 | $115.74 | 2 | $231.48 | |
| 11 | 2 | CG-TTSP | 1117 | torque tube spool piece 1 x .035 wall x 36 | 5.50 | $26.00 | 1 | $26.00 | |
| 12 | == | ============= | ==== | Canard Installation | |||||
| 12 | 1 | CNL | 1023 | aluminum bushing | 0.40 | $6.25 | 2 | $12.50 | |
| 12 | 1 | CN2 | 1019 | steel bushing | 0.05 | $4.44 | 2 | $8.88 | |
| 13 | == | ============= | ==== | Nose and Nose Gear | |||||
| 13 | CG-NWA | 1213 | Gerdes nosewheel w/ internal spacer | 36.00 | $96.00 | 1 | $96.00 | ||
| 13 | CG-NWA-R | labor, refurb customer wheel, add spacer | $60.00 | 1 | $60.00 | ||||
| 13 | CG-MIS | 1215 | Matco internal spacer | $25.00 | 1 | $25.00 | |||
| 13 | CG-MKNG-1 | 1138 | nose wheel bushing, Gerdes nosewheel | 1.40 | $9.15 | 2 | $18.30 | ||
| 13 | CG-MKNG-1M | nose wheel bushing, Matco nosewheel | 1.40 | $9.15 | 2 |